Stainless Steel Pipe Bends
$10.20
For latest price click here!
Specification:
- Specification: ASTM A403, ANSI B16.9 & B16.28 JIS B2312, JIS B2313.
- Bending Radius: R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
- Product Angle: 0° – 180°
- Material: type 304/304L , 316 / 316L , 310/310S , 317/317L.
- Thickness: 5S / 10S / 20S / 40S / 80S.
- Wall Thickness: 3mm-40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Gautam Exports is an approved manufacturer, Supplier & Stockiest of Stainless Steel Pipe Bends/ Piggable Bends in India to requirements of BVIS, IBR, BARC, DNV, BHEL, Sabic (Saudi Arabia), KNPC (Kuwait), Qatargas (Qatar), Saudi Electricity Company (Saudi Arabia), Marafiq (Saudi Arabia), ONGC (India), Indian Oil (India), Magnetrol (Belgium), Sipchem (Saudi Arabia), Van Leeuwen (Europe), Foster Wheeler Ltd (Switzerland) And TD Williamson (Singapore), Saudi Aramco (Saudi Arabia), we also manufacture following types of Stainless Steel Pipe Bends/ Piggable Bends :
- Stainless Steel 304 Pipe Bends/ Piggable Bends
- Stainless Steel 304L Pipe Bends/ Piggable Bends
- Stainless Steel 304H Pipe Bends/ Piggable Bends
- Stainless Steel 316 Pipe Bends/ Piggable Bends
- Stainless Steel 316L Pipe Bends/ Piggable Bends
- Stainless Steel 316H Pipe Bends/ Piggable Bends
- Stainless Steel 310 Pipe Bends/ Piggable Bends
- Stainless Steel 310S Pipe Bends/ Piggable Bends
- Stainless Steel 317L Pipe Bends/ Piggable Bends
- Stainless Steel 321 Pipe Bends/ Piggable Bends
- Stainless Steel 321H Pipe Bends/ Piggable Bends
- Stainless Steel 347 Pipe Bends/ Piggable Bends
- Stainless Steel 347H Pipe Bends/ Piggable Bends
- Stainless Steel 446 Pipe Bends/ Piggable Bends
We produce following types of stainless steel Pipe Bends/ Piggable Bends:
- Steel Pipe Bends
- Piggable Bends
- Miter Bends
- Steel Bends
- Piggable Bends
- 3D Bends
- 5D Bends
- Induction bends
Induction Bending is a controlled means of bending pipes through the application of local heating using high frequency induced electrical power.
Most induction bends are manufactured with tangent ends (straight sections) that are not affected by the induction bending process. Field welds are made or pipe pup sections are attached to the unaffected tangent ends, allowing for fitup similar to that found when welding straight sections of pipe together.
Induction bends come in standard bend angles (e.g. 45°, 90°, etc.) or can be custom made to specific bend angles. Compound bends (out-of-plane) bends in a single joint of pipe can also be produced. The bend radius is specified as a function of the diameter. For example, common bend radii for induction bends are 3D, 5D and 7D, where D is the nominal pipe diameter.